N trig duosense download

But then a few weeks later it disappeared and seemed to indicate it would be compatible. So I upgraded to W10 and everything is working fine. So you can no longer set the input methods as 'pen' 'touch' dual' or 'auto'. This is a bit of a pain as I used to have it set to 'auto', so the pen would disengage 'touch' when close to the screen, and then do the double tap with a finger to re-engage 'touch' input. As I'm sure you know this would eliminate unwanted palm touches etc; and even though W10 is meant to have good palm rejection, I find it is not perfect and I get random marks when inking in some applications like "Journal".

But there is a useful little application available to download online called "tray touch toggle", which I have set to run at start-up, so you can just tap on a little icon in the system tray and turn touch off or on easily. Hope this helps. I understand where you're coming from, I also searched for days looking for info about n-trig and W10 support,. It seems now that Microsoft have bought n-trig all references to it, and driver support etc have vanished.

But I have found the pen support on W10 to be good. The tracking and latency in the handwriting input panel is very good; and almost as good in Journal and Onenote. The Input panel has changed a bit from Windows 7 I didn't use W8 It appears as a small, dark floating panel; or full width docked to the taskbar.

Sometimes generic messages such as Windows 8 cannot load the drivers appear after an operating system upgrade. The problem is that all connected devices, including N-trig devices, need updated drivers to work properly under Windows 8. If you have recently updated to Windows 8, or your new Windows 8 computer, laptop or notebook fails to recognize your old devices, you also need to update all N-trig drivers in order to fix problems related to your N-trig hardware.

It will select only qualified and updated drivers for all hardware parts all alone. Any insight into this issue would be helpful. ScreaminWeasel Created on December 3. The touch screen function does not work after upgrading to Windows 7 from Windows Vista. To resolve this issue, download and install the latest N-Trig DuoSense Digitizer software and driver. Threats include any threat of suicide, violence, or harm to another. Any content of an adult theme or inappropriate to a community web site.

Any image, link, or discussion of nudity. Any behavior that is insulting, rude, vulgar, desecrating, or showing disrespect. Any behavior that appears to violate End user license agreements, including providing product keys or links to pirated software.

Unsolicited bulk mail or bulk advertising. Any link to or advocacy of virus, spyware, malware, or phishing sites. Any other inappropriate content or behavior as defined by the Terms of Use or Code of Conduct.

Any image, link, or discussion related to child pornography, child nudity, or other child abuse or exploitation. Details required : characters remaining Cancel Submit 1 person found this reply helpful. Thank you for providing this valuable information. This information will helps other Community users. You're a star, that worked a dream, touch screen working perfectly again now. I didn't have to disable the rubber track button but, like you, I never use it. I found that by holding my thumb on the screen, it seemed to counteract the ghost clicks.

Don't get me wrong, the ghost clicks are still all over the place but I found I could use the mouse normally in parallel once I kept my thumb on the screen and I could then disable the n-trig drivers and regain control of the laptop. Any insight into this issue would be helpful. This thread is locked.

You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question Report abuse. Details required :.